Concrete floor stained, dusting or peeling? We get the slab right first, then put down a polyaspartic coating that's hard-wearing and quick to cure.
Polyaspartic floor coatings in Concord, CA are a type of polyurea that Concord Precision Epoxy Flooring rolls over prepared concrete. They cure quickly and stand up to sun, chemicals and scuffing, so your garage, shop or patio gets a hard floor that's back in use fast.
Most people call me because the garage floor is stained, dusting or peeling from an old kit, and they want something that lasts this time. The price comes down mostly to the square footage and the shape the slab is in, since cracks, spalling, where the surface flakes off, and old coating that has to come off all add prep work. The schedule turns on the concrete and on a permit, if the job needs one, which we check on before we book. A new slab has to cure before it's coated, and one coating maker's instructions say to wait at least 28 days. I'll look at your floor in person and give you a written estimate with the reasons behind it, so you know your own number before you decide.
I come out to look at every job myself, check what's on the slab and how it's holding up, and write the estimate. When the work starts, I'm on site with our crew, so the person who priced it is there to answer questions.
I spent my school summers on flooring and concrete crews, grinding slabs and mixing coatings, and I started this business in Concord in 2023. Most failed floors I've looked at went wrong underneath, so we look hard at the concrete before we recommend a system.
We're licensed and insured, and that holds for a one-car garage the same as a shop floor. When you're ready, call (925) 536-0504 or use our estimate form, and have the square footage, any cracks or old coating, and the concrete's age handy.
We reply to calls and messages within one business day. After that, I come out, look at the floor in person and give you a free written estimate with the reasons behind it. There's no obligation and no pressure to book.
The city decides whether a floor coating job in Concord needs a permit, and that isn't settled for every job, so I don't guess. Before we schedule, we check with the city or county office that covers your address, and if the work needs a permit, we take care of the application and plan the job around it. If you'd like to ask yourself, Concord's Building Division takes calls at 925-671-3107, Monday through Friday from 8 a.m. to noon and 1 p.m. to 4 p.m.
We're based in Concord and work in the cities around it, from Walnut Creek and Pleasant Hill out to Antioch and over to Vallejo, and if your city isn't listed, just ask. Around here we mostly coat garages where a car has sat on the same slab for years, so we expect oil stains, a few cracks and sometimes an old kit coating that's started to lift, and we plan the prep around what we find.
Installed polyaspartic floor coating across the US usually costs about $5 to $12 per square foot. That's the going rate nationally, not our price, and your floor's size, the prep it needs and whether you choose a full system or a blend decide where yours lands. Call (925) 536-0504 and I'll come look and write it up.
Most polyaspartic coatings are dry to the touch within a few hours, and full cure for heavy vehicle traffic typically comes within 24 to 48 hours. Plan to park in the driveway or on the street until then, and we'll tell you when the coating we used is ready for your car.
Usually longer. By one cost guide's numbers, a professionally installed polyaspartic system lasts 10 to 20 years or more with minimal maintenance, while epoxy systems typically last 5 to 10 years. The same guide says store-bought DIY epoxy kits often peel within 1 to 3 years, which is why the prep under any coating matters so much.
Concord's Project Pal tool shows which permits your project requires. It also gives zoning information and estimates permit fees, so you can price any permit before work starts. We check with the city before we schedule either way.
It can, even though most polyaspartic coatings are very low in VOCs, the chemicals that evaporate into the air. In California, local air districts limit the VOCs in coatings, which narrows what can be used here. We keep the space ventilated and wear protective gear while we work, and once the floor has cured it's non-toxic.
